Most factory AMR vendors sell you fixed-path robots that need a specialist to reprogram when your line changes. Prime’s PES is a workflow composition engine — reconfigure in software, not hardware.
Max payload capacity
QR + SLAM navigation
ERP / MES integration
Deployments running now
Payload capacity
Hybrid navigation
PES building blocks
ERP / MES integration
Deployments running now
Factory floors don’t sit still. New product lines, shifted workflows, retooled stations — every change means a reconfiguration project. With most AMR vendors, that means engineers, timelines, and cost overruns.
Fixed-path AGVs and tape-guided AMRs require physical re-routing every time production changes. What’s sold as “automation” becomes a constraint that slows your ability to adapt.
A robot vendor, an integration partner to wire it to your ERP, and your IT team — each pointing at the others when throughput drops. Every competitor assumes a system integrator will connect their robots to your systems. That’s a second project, a second contract, and a second point of failure.
Most warehouse AMRs top out at 500–800kg. Factory pallets, raw material sleds, and heavy components routinely exceed that. Your floor needs a different class of robot — few AMR vendors have it.
AMRS OWN
THE FLOOR.
Forklifts are built for loading docks — unloading trucks, staging inbound freight, moving heavy loads from the yard. The moment they’re running point-to-point missions inside the facility — station to station, line to line, shift after shift — you’re using the wrong tool. AMRs handle every internal transfer autonomously, so your forklifts stay at the dock and your operators stay off the floor traffic.
PES isn’t a robot controller — it’s a workflow composition engine. Assemble the factory automation workflows your operation needs from four proven building blocks, then reconfigure in software when the line changes.
High-density input buffer for raw materials and WIP. PES pulls from RackBot when the line needs replenishment — no manual staging area required.
Breakdown and kitting at the point of need. The APS station accepts inbound loads and presents components to operators in the right sequence.
MobilePallet AMRs move kits, components, and sub-assemblies wherever the line needs them. SLAM navigation handles mixed-traffic factory floors without tape or fixed paths.
PES reads production missions directly from your ERP or MES via API. When the schedule changes, PES reconfigures the workflow — no reprogramming, no downtime.
From manufacturing facilities to food & beverage distribution — Prime’s factory AMR system is running live workflows across a range of production environments.
Live deployments
in production
Concurrent workflow types
from one PES instance
Vendor accountable for
robots + software + support
Your ERP or MES pushes a production mission via API — a replenishment request, a kitting run, a return cycle. PES breaks it into a concrete sequence of robot tasks and dispatches them to the fleet. No manual boards, no radio calls. If the production schedule changes mid-shift, PES updates the queue automatically.
A MobilePallet AMR navigates autonomously through the factory — carrying full loads through yellow safety gates, across production zones, alongside forklifts and pedestrians. Prime uses both SLAM and QR navigation, and switches between them automatically: SLAM handles mixed-traffic aisles and zone-to-zone movement where paths are dynamic; QR codes take over at kitting stations and storage transfer points where precise, repeatable positioning matters. You get the flexibility of free navigation and the precision of a fixed-path system in the same robot.
Kitting stations, ASRS transfer points, conveyor docks — anywhere sub-centimeter repeatability matters. The robot locks to a QR code and positions precisely, every cycle.
Factory aisles, forklift corridors, zone transitions — dynamic pathfinding that adapts to real traffic in real time. No tape, no fixed paths, no infrastructure changes when your layout shifts.
The AMR carries its load across zones and approaches the drop-off station through the zone doorway. PES tracks the load in real time, routes around competing tasks and floor traffic, and queues the next mission the moment the drop-off is confirmed — no wait, no manual handoff.
AMRs move kitting totes, components, raw materials, and sub-assemblies wherever the production line needs them. One robot loaded, one already returning empty — PES coordinates the fleet so the right material arrives at the right station at the right time, without operators chasing stock or waiting at the line.
The AMR delivers directly to the kitting station. Totes are labeled and positioned for the operator — the PES tablet shows the active mission, pick sequence, and status. No paper, no radio dispatch. When the station completes its task, PES dispatches the next mission automatically.
When a tote empties at the line, PES dispatches a return mission. The AMR collects the empty and routes it back to the buffer staging rack — no operator intervention, no accumulation of empties blocking production aisles. Totes nest and stage ready for the next kitting run.
New product line? Shifted station layout? Open WorkFlow Builder in PES, drag the updated sequence, publish. Factory automation robots execute the revised workflow on the next mission cycle — no engineers, no downtime, no vendor call required.
One software layer orchestrates every robot, station, and third-party device in your factory. Create workflows, monitor execution, see throughput in real time, and watch robot allocation shift dynamically across active missions.
Drag-and-drop factory workflow composition. Build kitting, point-to-point, and return flows without code.
Live floor map with every AMR, task, and zone visible. Exceptions surface immediately across all workflows.
Bidirectional integration with SAP, Oracle, NetSuite, and custom MES systems — missions flow directly into PES.
System auto-allocates AMR fleet across workflows by priority weight, queue depth, and throughput targets.
We’ll walk through how PES would orchestrate your specific workflows — kitting, point-to-point transport, ERP integration — using your operation as the example. No sales deck. No generic demo.
No commitment required. We’ll reach out within one business day.
